What should I do if my computer does not boot into Windows?
When a computer starts or boots, the Windows operating system will load. There are many files that are executed and processes are started to load properly for windows.If a computer is unable to load the Windows operating system, then the problem may be due to many possible reasons. Please review the possible reasons and resolution options below to resolve and resolve the problem on your computer.
New Installed Hardware
New hardware in computers can sometimes cause problems due to the computer being able to boot properly in Windows. If you have recently installed a new hardware in your computer, turn off the computer, remove the new hardware, and start the computer again.If the computer can successfully boot into the Windows after removing the new hardware, then try to reconnect the problem again, if the problem persists, the hardware may be incompatible or defective. If no new hardware or new hardware has been removed, and the computer is not able to boot into Windows, continue on to the next section below.
Out of old or corrupted hardware drivers
The Windows operating system relies on the drivers to communicate with the hardware on the computer and understand how it works. If a driver is outdated or has become corrupted, it can cause Windows to become unstable, and sometimes the reason for the computer not being able to boot into the computer.The option to try to update or restore the driver is to boot the computer in safe mode (select safe mode with networking option). Once in safe mode, access the Windows Device Manager and check the yellow exclamation point or any device with red X in front of them.
If any device has an exclamation point or red X, right-click on that device and select the update driver to view an updated driver on the Internet. If you are not getting an updated driver, try right-clicking on the device, select uninstalled device, and restart the computer. By uninstalling the device and restarting the computer, it will force Windows to automatically retry and restore the device, which can sometimes fix the problem.
If updating drivers or uninstalling and reinstalling the device does not fix the Windows boot problem, then go to the next section.
Corrupt system files
When Windows is loading, many system files are being executed. If one or more of these system files are corrupted, then it cannot load windows properly or at all.You can recover corrupt system files by running the Windows Restore Point or by running the Windows repair process.
Activate Restore Point
If Windows restore points are created, you can try to activate the restore point before the Windows boot problem occurs. Since Windows is not operating normally, you can try to access the safe mode to activate the restore point.- Turn on the computer or restart and access the safe mode menu.
- Select Safe Mode with the command prompt option in the menu.
- At the command prompt, type rstrui.exe and press enter.
- Windows normally follow the instructions and signals provided to restore the instructions before starting problems in Windows.
If the activation of the restore point does not work to fix the Windows boot problem, or if no restoration point was available, then you will need to try the Windows repair process.
Windows repair process
Some computers provide a repair facility through the Recovery Console or System Recovery Environment, which can be accessed when the computer first boots. Often, one of the function keys, such as F1, F2, F10, or F12, or possibly R key, will take you to the Recovery Console. Once in the Recovery Console, check out a repair or fix Windows option. The repair process should only replace Windows operating system files and not delete any of your files.If you can not use the Recovery Console or System Recovery, or if a repair or fix option is not available, use the Windows installation disk or USB drive to access the Windows repair utility. Start the computer and boot on the Windows installation disk. When the installation menu is displayed, check the Windows Repair option and select that option. Follow the prompts to run the repair process. Again, only Windows operating system files should be installed, and your files must be retained.
If running the Windows repair process does not fix the problem, continue to the next section below.
Bad field or other hard drive issues
Problems on hard drives, such as bad areas, cannot boot Windows successfully. Hard drive issues can be without warnings, but they can also be fixed in many cases.You can test hard drives for failures using different free utilities, some of which are already available on your computer. Hard drive manufacturers often provide scans and test utilities for their specific hard drives.
Test the hard drive for failures and if someone is found then run the available fix process to resolve and improve the problem. If there are too many failures in the hard drive or the fix process does not work to fix the problem, then you will need to replace the hard drive.
If the hard drive is working properly or repair any hard drive issues, do not fix the Windows booting problem, continue on to the next section below.
Other hardware failures
If you have not installed any new hardware and the hard drive is working correctly, then it is possible that another existing piece of hardware in the computer is causing the problem. A defective motherboard, or video card, or piece of RAM can cause windows to not be able to boot properly.To test hardware problems, you can create and use a final boot CD, which includes a collection to troubleshoot and fix the problem-solving utility, and sometimes fix hardware problems. If a defective piece of hardware is found, then you will need to replace that hardware and then test the computer to check that it can boot successfully in Windows.
Reinstall Windows
After trying out all the troubleshooting options above, Windows boot problems still occur, the best way to act is to reinstall Windows. A full Windows will erase all the files on the restored computer and reinstall the operating system.If possible, remove the hard drive from the computer and connect it to another computer in the form of a secondary hard drive or an external hard drive using an attachment kit. Then, back up your files so that you do not lose any of it.
After backing up your files, reconnect the hard drive to the computer and reinstall the Windows operating system. When going through the installation process, make sure to select the option to erase all the files on the first hard drive. Doing this can help to ensure that Windows is fully and properly restored and works again after the installation process is complete.
What should I do if my computer does not boot into Windows?
Reviewed by Muneer Ahmed
on
October 19, 2018
Rating:
No comments: