Asus Zenfone Max Pro M1 Battery draining issue, huge standby drain

Asus Zenfone Max Pro M1 Battery draining issue, huge standby drain

1) If you have a third party monitoring application, just uninstall them. There are some examples of monitoring apps that display the speed of Internet connection in the bytes in the notification bar, or track your app usage, or track your net usage, or track your CPU or RAM usage etc. keeps.

• If it monitors your phone, just uninstall them. After uninstalling your phone, turn off your phone and then wait a minute and then boot normally. After you normally boot up, do not do anything for 5 minutes. Then close your phone again then wait a minute then boot in recovery, erase the cache partition, and then reboot. Now when the phone is being booted, do not do anything for 5 minutes (if you have set one, enter the lock screen pin/password). Like I said wait 5 minutes to let it be fully loaded. Then start using it normally.

2) Now continue to use the phone as normal up to 0% in battery drains and it closes. Now you have to calibrate the battery. To follow these steps, if you screw, you also screw along with calibration.

• After reaching zero of the battery and turning off, charge up to 100% of your phone in the switch of connection. After this, it reaches 100% and the turn of the notification turns to green (indicates the completion of the trickle charge), wait another 15 minutes to complete any residual trickle charge. 

• Just in case. Now the important part is ... you have to turn on the phone when the charger is on / the phone is still running. Then, while booting, the Asus logo is displayed in the phone, then the Zenfone logo, then the lock screen PIN/password (for people setting the lock screen protection), then the Zenfone logo.

•  Details here are now different because some people recommend shutting the charger when the Asus logo appears. But after the pin/password screen (those who do not set the lock screen protection, shutting the charger 6-7 seconds in the Zenfone logo), the charger is closed for 3 seconds in the second zenfone logo appearance. I will leave it to you that what you want to do to shut down the charger. And remember to turn off / turn off your charger, when the charger is still running, do not remove the USB cable. After closing the charger, wait 30 seconds and then eject the USB cable. Then use your phone normally until it reaches 0% and closes. Then repeat the above charging process. Do this for 3 times, your battery should now be properly calibrated.

Do not remove your battery using the battery draining app or use your battery to quickly get it out. Usually, use it as you usually do. Be Patience!