How to flash Redmi Note 3 with locked bootloader

Flashing Redmi Note 3 phone is very easy to flash if you know the proper way of flashing. There is nothing in this method of flashing that your phone is dead or working.

First, charge the phone up to 50% and make sure that you have a basic data cable that comes with the phone, you need this file to flash, so the first download this file first .......


Follow these Steps 

• Download Mile PC Suite

• Download mi Flash Tool

• Download Win RAR  (To unzip Stock Rome)

• Download Redmi Note 3 Flash File (Download Radmi Note 3 Qualcomm for the latest version of Redmi Note 3, latest global stable version)

• Download all edl fast boot

After downloading all this file, first, install the mi PC suite and then install the mi flash tool and then unzip the flash file of redmi note 3 and store it all over the desktop.

Now the flashing process is going to start

• Therefore the first turn on the computer with disable driver signature enforcement

• Then turn  the phone into fastboot mode by holding the power and volume down

• Then open the Fastboot Edl folder and then connect the phone to the computer

• Then run the EDL file of Fastboot edl folder at that time, the phone will be empty with red blink from above, that means the phone is in EDL mode.

• Now run the mi flash tool and first click Refresh and there will be a connection to the phone X: (com10 or com12 or com14)

• Then select Flash file and clear all below and then click on Flash.

The flashing process will take about 25 minutes so do not panic or remove the cable until the success screen pops up. And the first boot of the phone will take around 15minutes.