Flash Samsung M30 SM-M305F Stock ROM [ Samsung M30 Flash File

How To Flash Samsung M30 SM-M305F Stock ROM [ Samsung M30 Flash File ]

Are You Looking For Official Stock Rome For Samsung M30 SM-M305F Mobile? If yes, get a direct download link to download the Samsung M30 SM-M305F stock ROM with a flashing guide

But here we are sharing the entire step by step tutorial for flashing the Samsung M30 SM-M305F firmware using Odin Flash Tool.

Perhaps you know that Odin Flash Tool is an official firmware to flash any Samsung device. As such, you can also flash Samsung M30 SM-M305F using Odin Samsung Tool.

The Samsung M30 SM-M305F is a latest Android smartphone from Samsung's M series. After the major success of the Samsung M10 & M20, Samsung released a new upgraded device such as the SM-M305F, which is more powerful and more advanced than the other devices.

But if you are using this SM-M305F mobile and now you are getting problems related to the software such as stuck on the Samsung logo, hanging problem, over heating, auto restart and no network issues etc. Firmware Flashing The right solution for fixing issues is by itself. Simply flash the SM-M305F Flash file using the Odin tool.


Please note: Do not forget to confirm your own device model name and number, and then proceed to flash the Samsung M30 SM-M305F using Odin Flash Tool.

Advantages to flash the Samsung M30 SM-M305F Stock ROM

• Fix the Samsung M30 stuck on the Samsung logo
• Solve the Samsung M30 SM-M305F hanging problem
• Samsung M30 SM-M305F Auto Reboot - Fix
• Unroot Samsung M30 SM-M305F Mobile
• Flash Stock Recovery [Back to Stock Recovery From Recovery]
• Upgrade or downgrade Android version on Samsung M30 SM-M305F
• Solve Unregistered Network on Samsung M30 SM-M305F
• Device stuck on TwRP Recovery - Resolve
• Install new software on Samsung M30 SM-M305F

How to Flash Samsung M30 SM-M305F using Odin Tool

Download all the files and then remove them in any folder on your PC. [Drivers, flash files and tools]

Samsung M30 SM-M305F Official Firmware:  Download

Samsung M30 USB Drivers: Download

Samsung M30 Flash Tool: Download

1. Install Samsung M30 SM-M305F USB Driver on Windows PC. The installation of drivers should be to bridge connection between mobile and PC. If already installed, skip the phase.

2. Now enable the USB debugging and OEM lock by following the guide. [if possible. If you are unable to access your device, skip this step]

How to enable USB debugging in Android

• To enable USB debugging on Android phones, follow all the simple steps.

## Enable developer options first

Take the Android phone in your hand and now go to Settings and open it. Now go to the phone option about phone the last option in mobile and open it. Now find the build number and tap it 7 times until the pop up note "You are now are developer mode ".

Settings >> About Phone >> Build Number (tap 7 times)

## Activate USB Debugging

• Now in the settings of your mobile, you will find a new option "Developer Options" Click "USB debugging" and press "OK. 

• Switch on the device, turn it off and manually boot it in Downloading Mode or Odin mode.

3. Samsung M30 SM-M305F Download Mode:

• Power off
• Hold the Volume Up Key + Power Key at the same time, it will boot the device in Recovery mode
• Now select the "reboot to bootloader" option and the device will be in downloading mode

4. Connect the device with PC via working USB cable.

5. Now open the ODIy Tool folder and run it as admin.

6. After the tool opens, you will see the message added in the lower left section in the log window and the first box under the ID: COM will also show a number and blue its background. This means that the device is successfully connected with the PC.

7. This time you have to configure it properly. Be careful with the Odin software and carefully apply the changes as shown below.

8. Click on the "Options" tab and make sure the "Re-Partition" check box is not ticked and then configure it as shown in the screenshot below.

9. As you can see, the Samsung M30 SM-M305F firmware comes with 5 files but you only need to load up to four files.

10. Click on "AP", "Bl", "CP" and "CSC" button and load reference files one by one.

Important: When loading firmware files [.tar.md5 files], it may take a long time to load or does not respond to Odin. Do not worry about it and wait a few seconds for the full files to load. This is normal. The load time depends on your firmware size and it may vary for different Samsung devices.

11. Hit the "Start" button at the end to start the firmware flashing process. Flashing the full firmware here will take a long time. Therefore, do not unplug the USB cable between the flashing process.

12. After successful flashing, you will see a large "PASS" green massager on the tool windows. This means that the firmware has been successfully flashing and you can now unplug or unplug the USB cable.

13. The device will reboot automatically if not, reboot it manually and set up the device again as a new device.

14. All done!!!