Bypass Vivo Y93 FRP Using Sp Flash Tool

Bypass Vivo Y93 FRP Using Sp Flash Tool

Recently we published a post to remove Vivo Y93 FRP lock using vivo format and frp tool. In that tool, you can enable debugging frap lock vivo y93 mobile and then bypass FRP lock and pattern lock at the same time.

But if you are trying to find another way to unlock vivo y93, then sp flash tool is a wonderful tool that will help you unlock your device without any problems. Simply download the Vivo y93 frp file, download the frp code and unlock the factory reset protection using Sp flash tool.

Before going into Vivo FRP Unlock using the Sp FlashTool Process, it's a little harder to know that using the Vivo Refrigerator tool. but do not worry; We will try to convince everyone with all the necessary screenshots.

As we all know, we can unlock pattern lock or pin lock by a factory reset. But the problem is that it is not possible with vivo devices. If the device is locked, it will ask you to enter the correct pattern lock or PIN password to unlock the device's recovery mode. Similarly, if you have a Google Account on the same device, then it will be stuck on the Google Account Verification screen after the factory reset. For this, you have the option of unlocking frp on Vivo y93 using Sp Flash Tool.

How to bypass Vivo Y93 FRP using Spice Tool

As we already told you that Vivo is a Y93 MTK chipset based Android smartphone, we can use free SP Flash Tool to format or remove the frame lock without error. Just use the correct Vivo Y93 DA file, authentic file and FRP code with the right instructions.

• First, install "VCOM driver" or "MTK" driver on Windows PC. If already installed, skip the phase.

• Download Vivo Y93 frp zip file and extract it on PC. Here you will see a folder called "SpA Flash Tool", "Scatter File", "Authentic File" and "DA File".

• Launch "SP Flash Tool" as an admin.

• Click the "Select" button and load the "DA_PL_MT6762_0321.bin" file from the "Download -agent" section and from the extracted folder.

[Its DA file must be loaded. Otherwise, Tool da file will show error]

• Now browse the scatter file in Scatter-loading section.

• As above, click on the "Select" button from "Authentication file" and load "Authentic File" from the removed folder.

• Now click on the "Download" button to start the format process.

• Power off device >> Remove and re-insert the battery >> Plug the USB cable

• The device will detect the device and it will format the device to reset the device.

• Pattern or Pin Lock Deleted

Please note: At this point, the pattern lock removed from your device. If you want to remove the FRP lock, continue the next step.

• Unplug the USB device from the device.
• Navigate to the "Format" tab >> Select "Manual Format Flash" tab >> Change the "Start address" and "Format length" along with the values ​​shown below in the screenshot.

• Finally hit the "Play" button.
• Now again "Remove and Re-insert Battery" >> "Plug USB Cable" to start the FRP unlock process.
• The device will detect the device and it will remove the frp lock within a few seconds.
• done!!!!

Reboot the device again and set it up as a new device. This time you will not ask to enter an existing Google ID and password. This means that frp removed from vivo y93 using the SP tool.

So far there is a problem at any stage to bypass the Vivo Y93 frp lock using Sp flash tool, please leave your comment and tell me.