Unbrick Redmi Note 4 Universal Method

How To Unbrick Redmi Note 4 Universal Method.

Hey, Xiaomi Lovers
Let's see how to keep Radmi note 4 after boot loop issue, trapped in MI logo, unable to boot in recovery mode etc. Use the universal method to remove all Xiamen issues.

If your redmi note is not properly working or stuck at for bootup, which means that you have bricked your device. Now we will show you how to easily remove Radmi Note 4. Actually, this is a universal way and you can apply it to any of the Xiaomi Android smartphones.

There is no need to unlock the bootloader.

No need to enable USB debugging and OEM unlock

Due to the brick issue, different users can vary. Of these, the wrong firmware flashing, incorrect rooting method or files are the main reason. So if you are unable to boot your Radmi Note 4 or your Radmi Note 4, then MI is trapped on the logo or Remote Note 4 has been stuck in BootType or you do not start after polishing new roms on your device. This means that your Xiaomi Redmi note is 4 briquettes / dead and now you have to unbridle Radi note 4 using Mia Flash Tool [Only Fastboot Rome] to polish Stock Rome Sing


To learn the important point before going to the next step.
Shading stock ROM or original firmware on your redmi note 4 is the ultimate solution to unbrand yourXiaomidevice. So you can use two different types of Rome
1. Recovery Rome
2. Fastboot Rome

Xiaomireleased two types of ROMs for Mi Mobile
Recovery ROM [.zip format] - If you want to flash through mobile
Fastboot ROM [.taz or .tar format] - If you want to flash through PC / Computer
So download and use the MIUI Global stable Fastboot ROM with Flash only in Flash with Mi Flash Tool. Do not try to use Recovery Rome for this method.

Download files and tools
Create MI Account [Official MI Account Page]
Download MI Flash Tool [Only for Fastboot ROM]
Download and install USB drivers
Download Xiamme Fastboot ROM Redmi Note 4
Step by step to unbrick redmi note 4 using MI flash tool

Step01 boot device in fast01 boot device -
Turn off your device by pressing Volume Down + Power Key at the same time and booting into Fastboot mode. Now the phone should be in fastboot mode.

Step 2 Connect the device with PC via USB cable.

Step03

• Launch MI Flash Tool and make sure your device is already connected to PC.
• Now click on the "browse" button with the tool and browse MIUI fastboot roms that you want to flash and press "OK".
• Now click on the "refresh" button in MI Flash tool and it will automatically detect your device.
• Click the "flash" button to start the fastboot flashing process and wait for the process to complete.
• After completing the process, the progress bar will be completely green and you can see the successful message "Operation successfully completed"
• Completing the full flashing process can take 5-10 minutes. So do not stop the process and sit back.
• Now you can disconnect your mobile from the PC and it will reboot automatically. If not, reboot it normally.
• If you are unable to flash the MIUI fastboot rom or get the error during the flashing process, then select "Flash All" or "Flash All Data and Storage" option below Mi Flash Tool. all done !!!
• This is a completely decisive process for unbinding the Redmi Note 4. No matter whether bullder is locked or unlocked, it does not matter whether or not USB debugging is enabled. Simply download Mi Flash Tool and Flash Flash Global Stable Fatboot ROM, that's it.