Fix The File Is Too Large for the Destination File System:

Storage drives are very popular and important. There were days when 1 GB was a bigger size. But, nowadays, many terabyte storage drives are available in the market. However, you may still get this error "File is very large for file system file". Even when there is enough free storage available, you are also present when facing this problem. However, you can easily fix the file for the destination file system problem by tweaking some files.

You can ask yourself why you are facing this problem while transferring or copying anything in pen drive, SD card, external hard disk or local disk drive. The answer is very simple. You are receiving this very large file size warning because the destination file system is set to FAT32 or FAT12 or any earlier. The maximum file size for FAT 32 is 2 GB to 4 GB and FAT 12 is only 32 MB. This is the reason that these types of problems are more in older storage drives.

Fix The File Is Too Large for the Destination File System:

There is only one solution to this problem. It is 'converting file system into NTFS'. This will allow you to store files over 4 GB size. Modern hard disks are set to NTFS by default. Perhaps, this is their only file system. Therefore, generally, people do not have to face this error on a local drive. But, it is more for Pendrive and SD card. Because of these storage drives by default use FAT32. Therefore, the destination file system is too big to fix the file, we will replace the FAT32 / 12 in NTFS. We can do it in two ways.

1. Using the command prompt:

This method will change the file system to NTFS without formatting. So, your existing data should be fine. But, however, I advise you to back up your files. After doing so, follow those things.

• First, right-click on Start (Windows Logo Button) and select Command Prompt (Admin).
• Now, run a disk such as <disk drive letter>: / fs: ntfs. Suppose, your probabilistic storage drive is letter D. Therefore, the command should be like this.

                                                              convert d: /fs:ntfs

• Generally, it should work without any issue. But, sometimes, it can demand your permission to remove the force. In that case, just press Y and press Enter.
• The command to fix the file is too large for the destination file system
• The destination file system should fix the file.

99% of the time, it should work. If it does not, then follow the next method.

2. Fix by formatting storage drive:

If the use of the command does nothing for any reason, you can still do this by formatting your problematic storage drive. But, do not forget to back up your files before doing this. You can right click on the disk drive that has the problem and chooses the format. Then, a new window will appear. From there, choose NTFS as the file system and default allocation size, allocation in the form of united size. After that, click on the format. Now, it will replace the entire file system and will make the file bigger for the file system. If you think the storage is immutable, read: How to format unofficial disk drives.

There are also some third-party split tools that can do this for you too. Anyway, I hope this article will help you fix your problem.