Bypass Moto E3 Power FRP lock Using Sp Flash Tool [Moto E3 Power XT1706]

Bypass Moto E3 Power FRP lock Using Sp Flash Tool [Moto E3 Power XT1706]

Moto E3 Power XT1706 Looking for an instant and working FRP lock bypass phone for android phone? If yes, then here is a quick Moto E3 Power FRP bypass trick which will help you to remove the Frp lock on Motorola Moto E3 Power XT1706 using the Sp flash tool.

SP Flash Tool is a small software to flash the official scatter firmware of any MTK Android phone. You can also use this tool to install Twrp Recovery on any MTK Android phone.

As we all know that the Moto E3 Power XT1706 MediaTech chipset is based on CPU. So we can flash the frp bypass scatter file easily on Motorola E3 Power Mobile.

Before using SP Flash Tools, please check once and learn how to use the MOTO FRP bypass tool to remove FRP lock on any MOTO device, including the "Nougat & marshmallow version?"

We have already managed to post complete details about the Universal Motorola FRP Bypass Tool. Check out the link below and search for different Moto frp bypass tools and methods.

Different Motorola FRP Bypass Tools and Methods

All the above methods and tricks are fully working by us and are doing the test, and you can use any method to remove Google account verification on the Moto E 3D Android phone. But still want to use the Moto E3 Power XT1706 MediaTek to delete the factory reset protection on the phone, then go ahead and follow the instructions as shown below.

How to Bypass Moto E3 Power Using Moto Flash Tool

Remember that all the above methods can be used to remove frp lock on any Moto Android phone, but the files below should be used only with the FRP locked Moto E3 Power MTK phone. Do not try to flash below the Moto e3 power frp bypass scatter file on any other Motorola device.

Now start the process and see how to remove Moto E3 Power Google Account verification using Sp Flash tools?

Step01 Download Moto E3 Power FRP File, Drivers & Tools

Frp Scatter File

Moto E3 Power FRP Code

Moto E3 Power XT1706 Flash Tool

Moto E3 Power XT1706 Drivers

Step02 Pre-Requirements To Remove FRP Lock

• Charge the device almost. 80% to prevent accidental electricity between the flashing process
• Download all Moto E3 Power Frap files, frp codes, drivers and tools.
• Working USB Cable
• Laptop or pc

Step03 Process to Flash Moto E3 XT1706 FRP

• First, download and install usb drivers on PC. [Skip when step is already installed]
• Remove Moto E3 Power Frp Scatter File / Moto E3 Power FRP Code and Flash Tool downloaded on PC.
• Open the flash tool and run "Flash_tool.exe" as an administrator.

• Click on the "Scatter-loading" option from the extracted folder and load the MT6735M_android_scatter.txt file.

Now go to "Format" Tab >> select "Manual Format Flash" option and replace values with values below.

Begin Address [HEX]: 0x9A80000

Format Length [HEX]: 0x100000

• After the configuration, hit the start button to start the frp bypass flashing process.
• Now power the device properly and connect it directly to the PC via USB cable.
• Once your device is found with PC, the process will start.
• The end of the process will show you the successful message on the screen.
• All done!!!

Is this all about "Bypassing the Moto E3 Power Frap using Flash Flash Tool?"

Do not forget to try other universal Moto FRP bypass tools. This will help you bypass the Moto E3 Power Google Account verification without scatter file.